language
中国
韩国
韩国
韩国
韩国
韩国
An innovative power production enterprise focusing on green power distribution, energy conservation and environmental protection
Product
All Products
Recommended products
编号:
1. Use frequency: 50/60HZ;
2. No-load current:<4%;
3. Compression strength: 20000V/min without breakdown; Test instrument: YZ1802 withstand voltage tester (20mA);
4. Insulation grade: F (special grade can be customized);
5. Insulation resistance: ≥ 2M Ω test instrument: ZC25B-4 megohmmeter<1000 V);
6. Connection mode: Y/Y, △/Y0, Yo/△, auto coupling (optional);
2. No-load current:<4%;
3. Compression strength: 20000V/min without breakdown; Test instrument: YZ1802 withstand voltage tester (20mA);
4. Insulation grade: F (special grade can be customized);
5. Insulation resistance: ≥ 2M Ω test instrument: ZC25B-4 megohmmeter<1000 V);
6. Connection mode: Y/Y, △/Y0, Yo/△, auto coupling (optional);
编号:
Number of views:
1000
Keywords:
dry-type transformer
Best dry type transformer
dry type transformer Wholesale Price
编号:
The iron core of S11-M series low loss energy-saving transformer produced by our company adopts laminated structure. This product is based on fully absorbing the advanced technology and process of domestic oil immersed transformer, combined with the technical level of our company, putting the reliability of the product in the first place, at the same time, the no-load loss and no-load current of the product are greatly reduced.
编号:
Number of views:
1000
Keywords:
Oil immersed transformer
编号:
编号:
Number of views:
1000
Keywords:
American box changer (combined box changer)
编号:
The prefabricated substation (also known as European box substation) conforms to the GB/T17467-1998 standard and IEC1330 standard. It is flexible and convenient to install, with small loss, low noise, and strong resistance to short circuit and overload.
编号:
Number of views:
1000
Keywords:
European-style box changer (pre-installed box changer)
编号:
Buried box-type substation is also known as buried substation, landscape box-type substation, underground substation, sunken box-type substation, etc., which is mainly called by its structure and external appearance.
编号:
Number of views:
1000
Keywords:
Buried box transformer
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminal CNC machinery and equipment, etc. Simply speaking, dry type transformers refer to transformers whose iron cores and windings are not immersed in insulating oil.
编号:
Number of views:
1000
Keywords:
230v
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
transformer
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
cast
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
electric
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
phase
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Low loss, low partial discharge, low noise, strong heat dissipation, and can be operated at 120% rated load under forced air cooling.
编号:
Number of views:
1000
Keywords:
Dry type transformer
1000kva transformer
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
The cooling mode is divided into natural air cooling (AN) and forced air cooling (AF). During natural air cooling, the transformer can operate continuously for a long time under rated capacity. When forced air cooling is applied, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in non-economic operation state, so it should not be kept in long-term continuous overload operation。
编号:
Number of views:
1000
Keywords:
Onan transformers
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
onan transformers
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
Dry type transformer
SCB10
编号:
Dry type transformers are widely used in local lighting, high-rise buildings, airports, terminals, CNC mechanical equipment and other places. Simply speaking, dry type transformers refer to transformers whose core and windings are not immersed in insulating oil.
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation
编号:
Number of views:
1000
Keywords:
transformer
detail_decorate_root
width
margin-left
margin-top
height
750px
hidden
编号:
编号:
Number of views:
1000
Keywords:
编号:
编号:
Number of views:
1000
Keywords:
编号:
编号:
Number of views:
1000
Keywords:
底部留言
Description:
Add: No. 2, Shashui Village, Laobian, Danzao Town, Nanhai District, Foshan City, Guangdong Province, China
Tel：+86-13431672143/86-13229275711/+86-18603093593
Fax：+86-757-8109-2137
WhatsApp：+86-13695195603/86-13229275711/+86-18603093593
Email：zjx@shengtetransformer.com
Email：owen@shengtetransformer.com
Email：juanie@shengtetransformer.com
Code：528000
Website：www.senttransformer.com
+86-757-81092139
Skype
